EM132

Multi-Function Transducer

SATEC EM132 is a Smart DIN Rail Multi-Function Transducer with a local display. It is based on SATEC’s best seller PM130 PLUS with an off‑the‑shelf LCD display (similar to the BFM136 display). The EM132 provides the full functionality of the PM130P PLUS combined with energy measurement and battery backup for the real time clock. The EM132 is fully compatible with all PM130 PLUS modules.

The EM132 is a cost-effective multi-function transducer with local display, designed to replace analog or digital transducers. Its local display allows setup and verification of installation, without the hassle of using computers. One device supports all network configurations (i.e., 3 wire, 4 wire, wye, delta, etc.) and is field configurable.

The EM132 accurately measures over 100 parameters from basic frequency, voltages and currents, to all power parameters, 4 quadrant active, reactive and apparent energies.

The EM132 has an integral RS-485 communication port for a wide range of protocols—Modbus, DNP 3.0 and IEC 60870. Its expansion port allows connection of a second communication port, including Ethernet, Profibus, RF or GPRS, as well as second RS-485 and RS-232 ports.

The unique field installable add-on feature allows adding digital and analog I/Os. When using the 4 analog output add-on, the EM132 can replace 4 analog 4-20mA transducers. Each one can be freely programmed to any parameter and scaling.

Multifunctional 3-Phase Power Meter
- Voltage, current (including neutral current), power, energy, power factor, frequency, voltage/current unbalance
- Current range up to 200% (120% for 100A model)
Revenue Meter
- Exceeds accuracy class 0.5S
Real-Time Clock
- Built-in clock and calendar functions
- 2 year battery backup
Alarm and Control functions
- 16 programmable set points
- 4 counters
Power Supply
- Self powered plus auxiliary multi-purpose AC/DC power supply (85-265V AC, 88-290V DC)
- Special versions (12, 24-48V DC)
Communication protocols
- Protocols: Modbus RTU, ASCII, DNP 3.0, Modbus/TCP, DNP3/TCP
Mounting
- DIN Rail sealable connection

The EM132 modular approach enables users to assemble a system that meets their specific needs.


Second Communication port Small form One of the following: Ethernet (TCP/IP) PROFIBUS RS232/422/485 GPRS		Analog Outputs Small form 4 analog outputs, selection of ranges upon order: ±1mA 0-20mA 0-1mA 4-20mA 0-3mA ±3mA 0-5mA ±5mA

Digital I/O Small form 4 Digital Inputs (Dry Contact) / 2 Relay Outputs 250V / 5A AC 4 Digital Inputs (Dry Contact) / 2 SSR Outputs 250V / 0.1A AC 4 Digital Inputs (Dry contact) with RTC battery backup for TOU		Digital I/O Large form 12 Digital Inputs (Dry Contact or 250VDC) 4 Relay Outputs 250V/5A AC Optional selection of Ethernet, RS-485 or Profibus